If you are a do-it-yourself kind of person and are looking to have a screen door installed, chances are that you are probably thinking you can do the job yourself. However, doing your own security door installation is a major decision and this means that you will need to do some groundwork before you begin. Not only is the task tough but once complete, this is going to be something you see and use every single time you leave the house and then again when you come back.
The first thing is to consider the style and size of your screen door. While wooden frames are the most common ones, steel and vinyl have also grown popular over time. Apart from this, you may also want to look into the style you want depending on the space you are working with. Retractable screens are more common with people working with smaller spaces such as tiny houses.
If you are thinking about using wood, then ensure that you avoid buying wood with dead knots. Some wood knots are actually black so it might be a little tricky for you to distinguish between a normal dark knot and a dead one. So, for you to know which is which, the best thing to do is cut through the knot. A normal dark contour will hold but a dead knot will fall right off.
The next point is fairly simple. Remember to number your wood planks as you cut them. This will cut your assembly time in half since you know exactly where every panel goes rather than figuring everything out from scratch every time you want to join two panels together.
Take your time sanding. This means sanding the wood planks before assembly if necessary and then again once the frame is assembled. This will ensure that you have a smooth, clean piece once you are done which will make your job easier when it comes to painting. A frame that has not been sanded so well will have bumps in the paint and this maybe cause to repaint sooner than later and a peeling frame on a screen or sliding door is hardly going to be attractive enough to make you want to spend some time outdoors.
If you are installing a security door, steel is your best friend. It is a hard material that lasts longer and is more durable to weather and forced damage. You can get some from a local steel dealer. You may want them to put the frame together though, unless you are serious with your DIY and happen to have the appropriate steel welding tools. Either course of action this may be costly and additionally you may want to invest in some protective clothing if this is the case.
One of the things to note is that if you live in a windy area, you are most likely going to have to clean the screens and frames more often than you would like to. If you are not going to be able to clean them regularly, you may want to look into installing roller shutters on your windows, screen and sliding doors. The roller shutters are relatively easier to clean and will keep the screens underneath cleaner for longer. They are especially handy in the rainy season. Otherwise, you would have to schedule a cleaning every time it rains which is a little inconvenient as nature is not exactly predictable. Sliding screen doors can be a difficult task to install or repair so when working with screen doors I would ultimately recommend a professional company, visit this screen doors company in Melbourne for more information and professional advice for your sliding door projects.
Finally, stock up on some repair supplies. Tears on a screen are common especially if you have a furry friend or two but they are also something that any DIY-er can handle. A simple tear can be fixed by a screen repair patch or tape so you don’t have replace the screens every time they have a small tear.